So sánh thông số kỹ thuật Cisco WAP125 Wireless và WiFi Cisco WAP150

Cisco WAP125 Wireless-AC Dual Band Desktop Access Point with PoE

Xem SP nổi bật : Cisco AIR-AP2802I-S-K9 ; Cisco AIR-CT3504-K9

Specifications Description

Standards

IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (Security Authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Cabling type

Category 5e or better

Antennas

Internal antennas optimized for installation on desktop

Led indicators

1 multifunction LED

Operating system

Linux

Physical Interfaces

Ports

10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)

Power supply

External 12V/1A DC power jack (Energy Star 2.0 compliant with Efficiency Level 6) and 802.3af/at PoE

Buttons

Reset button, power on/off push button

Lock slot

Slot for Kensington lock

LEDs

1 LED

Physical Specifications

Physical dimensions
(W x D x H)

4.85 x 4.85 x 1.25 in. (123 x 123 x 31 mm)

Weight

0.67 lb (303 g)

Network Capabilities

VLAN support

Yes

Number of VLANs

1 management VLAN plus 8 VLANs for SSIDs

802.1X supplicant

Yes

SSID-to-VLAN mapping

Yes

Auto-channel selection

Yes

Spanning tree

Yes

Load balancing

Yes

IPv6

Yes

●  IPv6 host support

●  IPv6 RADIUS, syslog, Network Time Protocol (NTP)

Layer 2

802.1Q-based VLANs, 8 active VLANs plus 1 management VLAN

Security

WPA/WPA2

Yes, including enterprise authentication

Access control

Yes, management Access Control List (ACL) plus MAC ACL

Secure management

HTTPS

SSID broadcast

Yes

Rogue access point detection

Yes

Mounting and Physical Security

Mounting options

Desktop

Physical security lock

Kensington lock slot

Quality of Service

QoS

Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS

Performance

Wireless throughput

Up to 867-Mbps data rate (real-world throughput will vary)

Recommended user support

Up to 64 connective users, 10 active users

Configuration

Web user interface

Built-in web user interface for easy browser-based configuration (HTTP, HTTPS)

Management

Management protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management

Yes

Event logging

Local, remote syslog, email alerts

Network diagnostics

Logging and packet capture

Web firmware upgrade

Firmware upgradable through web browser, imported or exported configuration file

Dynamic Host Configuration Protocol (DHCP)

DHCP client

IPv6 host

Yes

HTTP redirect

Yes

Wireless

Frequency

Dual bands (2.4 and 5 GHz)

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency Division Multiplexing (OFDM)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

WLAN

802.11ac/n

2×2 Multiple-Input Multiple-Output (MIMO) with 2 spatial streams at 5 GHz

2×2 MIMO with 2 spatial streams at 2.4 GHz

20-, 40-, and 80-Mhz channels for 802.11ac

20 and 40 MHz for 802.11n

PHY data rate up to 867Mbps

Data rates supported

802.11a/b/g:

●  54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps

●  802.11n: 6.5 to 300 Mbps

◦   20-MHz bandwidth: MCS 0-15 for supported data rates

◦   40-MHz bandwidth: MCS 0-15 for supported data rates

●  802.11ac: 6.5 to 867 Mbps

◦   20-MHz bandwidth: MCS 0-9 for supported data rates

◦   40-MHz bandwidth: MCS 0-9 for supported data rates

◦   80-MHz bandwidth: MCS 0-9 for supported data rates

Frequency band and operating channels

A/C Regulatory Domain

●  2.412 to 2.462 GHz; 11 channels

●  5.180 to 5.240 GHz; 4 channels

●  5.745 to 5.825 GHz; 5 channels

E/J Regulatory Domain:

●  2.412 to 2.472 GHz; 13 channels

●  5.180 to 5.240 GHz; 4 channels

K Regulatory Domain:

●  2.412 to 2.472 GHz; 13 channels

●  5.180 to 5.240 GHz; 4 channels

●  5.745 to 5.805 GHz; 4 channels

Non-overlapping channels

2.4 GHz

●  802.11b/g

◦   20 MHz: 3

●  802.11n

◦   20 MHz: 3

5 GHz

●  802.11a

◦   20 MHz: 9

●  802.11n

◦   20 MHz: 9

◦   40 MHz: 4

●  802.11ac

◦   20 MHz: 9

◦   40 MHz: 4

◦   80 MHz: 2

Wireless isolation

Wireless isolation between clients

External antennas

None

Internal antennas

Internal Fixed Planar Inverted-F Antenna (PIFA)

Antenna gain In dBi

Maximum antenna gain of 4.02 dBi on 2.4 GHz

Maximum antenna gain of 5.63 dBi on 5 GHz

Wireless Distribution System (WDS)

Yes

Fast roaming

Yes

Multiple SSIDs

8

Wireless VLAN map

Yes

WLAN security

Yes

Wi-Fi Multimedia (WMM)

Yes, with unscheduled automatic power save

Operating Modes

Access point

Access Point mode, WDS Bridging, Workgroup Bridge mode

Environmental

Power options

IEEE 802.3af Ethernet switch

Cisco Power Injector: SB-PWR-INJ2-xx

AC adapter included, 12V/1A

POE peak power: 6.5W

Compliance

Safety:

●  UL 60950-1

●  CAN/CSA-C22.2 No. 60950-1

●  IEC 60950-1

●  EN 60950-1

Radio approvals:

●  FCC Part 15.247, 15.407

●  RSS-210 (Canada)

●  EN 300.328, EN 301.893 (Europe)

●  AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility (Class B):

●  FCC Part 15.180 and 15.109

●  ICES-003 (Canada)

●  EN 301.489-1 and -17 (Europe)

Operating temperature

0° to 40°C (32° to 104°F)

Storage temperature

-20° to 70°C (-4° to 158°F)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

System memory

256 MB RAM

128 MB flash

Package Contents

●  WAP125 Wireless-AC/N Dual Band Desktop Access Point

●  Power adapter 12V/1A

●  Quick-start guide

●  Ethernet network cable

Minimum Requirements

●  Switch/router with PoE support, PoE injector, or AC power adapter

●  Web-based configuration: Web browser

Warranty

Access point

Limited lifetime

Cisco WAP150 Wireless-AC/N Dual Radio Access Point with PoE

Specifications Description
Standards IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Ports LAN Gigabit Ethernet auto-sensing
Cabling type Category 5e or better
Antennas Internal antennas optimized for installation on a wall or ceiling
LED indicators 1 multifunction LED
Operating system Linux
Physical Interfaces
Ports 10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)
Buttons Reset button, power on/off push button
Lock slot Slot for Kensington lock
LEDs 1 LED
Physical Specifications
Physical dimensions (W x D x H) 5.31 x 5.31x 1.5 in. (135 x 135 x 38 mm)
Weight 0.77lb or 350g
Network Capabilities
VLAN support Yes
Number of VLANs 1 management VLAN plus 8 VLANs for SSIDs
802.1X supplicant Yes
SSID-to-VLAN mapping Yes
Auto-channel selection Yes
Spanning tree Yes
Load balancing Yes
IPv6
  • Yes
  • IPv6 host support
  • IPv6 RADIUS, syslog, Network Time Protocol (NTP)
Layer 2 802.1Q-based VLANS, 8 active VLANs plus 1 management VLAN
Security
WPA, WPA2 Yes, including Enterprise authentication
Access control Yes, management access control list (ACL) plus MAC ACL
Secure management HTTPS
SSID broadcast Yes
Rogue access point detection Yes
Mounting and Physical Security
Multiple mounting options Desktop or Wall
Physical security lock Kensington lock slot
Quality of Service
QoS Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS
Performance
Wireless throughput Up to 1.2 Gbps data rate (real-world throughput will vary)
Recommended user support Up to 64 connective users, 10 active users per radio
Multiple-Access Point Management
Single Point Setup Yes
Number of access points per cluster 4
Active clients per cluster 120
Configuration
Web user interface Built-in web user interface for easy browser-based configuration (HTTP, HTTPS)
Management
Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management Yes
Event logging Local, remote syslog, email alerts
Network diagnostics Logging and packet capture
Web firmware upgrade Firmware upgradable through web browser, imported or exported configuration file
Dynamic Host Configuration Protocol (DHCP) DHCP client
IPv6 host Yes
HTTP redirect Yes
Wireless
Frequency Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type Dual radio, orthogonal frequency division multiplexing (OFDM)
WLAN 802.11n/ac 2×2 multiple-input multiple-output (MIMO) with 2 spatial streams at 5 GHz 2×2 MIMO with 2 spatial streams at 2.4 GHz 20-, 40-, and 80-Mhz channels for 802.11ac 20- and 40-Mhz for 802.11n PHY data rate up to 1.2 Gbps 802.11 dynamic frequency selection (DFS)
Data rates supported

802.11a/b/g:

  • 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
  • 802.11n: 6.5 to 300 Mbps ◦   20-MHz bandwidth: MCS 0-15 for supported data rates ◦   40-MHz bandwidth: MCS 0-15 for supported data rates
  • 802.11ac: 6.5 to 867 Mbps ◦   20-MHz bandwidth: MCS 0-9 for supported data rates ◦   40-MHz bandwidth: MCS 0-9 for supported data rates ◦   80-MHz bandwidth: MCS 0-9 for supported data rates
Frequency band and operating channels

A/B Regulatory Domain

  • 2.412 to 2.462 GHz; 11 channels
  • 5.180 to 5.240 GHz; 4 channels
  • 5.260 to 5.320 GHz; 4 channels
  • 5.500 to 5.700 GHz; 8 channels
  • 5.745 to 5.825 GHz; 5 channels E Regulatory Domain:
  • 2.412 to 2.472 GHz; 13 channels
  • 5.180 to 5.240 GHz; 4 channels
  • 5.260 to 5.320 GHz; 4 channels
  • 5.500 to 5.700 GHz; 8 channels

C Regulatory Domain:

  • 2.412 to 2.462 GHz; 11 channels
  • 5.180 to 5.240 GHz; 4 channels
  • 5.260 to 5.320 GHz; 4 channels
  • 5.745 to 5.825 GHz; 5 channels K Regulatory Domain:
  • 2.412 to 2.472 GHz; 13 channels
  • 5.180 to 5.240 GHz; 4 channels
  • 5.260 to 5.320 GHz; 4 channels
  • 5.500 to 5.620 GHz; 7 channels
  • 5.745 to 5.805 GHz; 4 channels
Non-overlapping channels

2.4 GHz

  • 802.11b/g ◦   20 MHz: 3
  • 802.11n ◦   20 MHz: 3

5 GHz

  •   802.11a ◦   20 MHz: 21
  • 802.11n ◦   20 MHz: 21 ◦   40 MHz: 9
  • 802.11ac ◦   20 MHz: 21 ◦   40 MHz: 9 ◦    80 MHz: 4
Wireless isolation Wireless isolation between clients
External antennas None
Internal antennas Internal Fixed Planar inverted-F antenna (PIFA)
Antenna gain in dBi Maximum antenna gain of 3.61 dBi on 2.4 GHz Maximum antenna gain of 3.85 dBi on 5 GHz
Wireless distribution system (WDS) Yes
Fast roaming Yes
Multiple SSIDs 8
Wireless VLAN map Yes
WLAN security Yes
Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save
Operating Modes
Access point Access point mode, WDS Bridging, Workgroup Bridge mode
Environmental
Power options IEEE 802.3af Ethernet switch Cisco Power Injector – SB-PWR-INJ2-xx AC adapter – SB-PWR-12V/1.5A power adapter in a box POE power Peak power: 9.5Watts
Compliance

Safety:

  • UL 60950-1
  • CAN/CSA-C22.2 No. 60950-1
  • IEC 60950-1
  • EN 60950-1 Radio approvals:
  • FCC Part 15.247, 15.407
  • RSS-210 (Canada)
  • EN 300.328, EN 301.893 (Europe)
  • AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B):
  • FCC Part 15.107 and 15.109
  • ICES-003 (Canada)
  • EN 301.489-1 and -17 (Europe)
Operating temperature 0° to 40°C (32° to 104°F)
Storage temperature -20° to 70°C (-4° to 158°F)
Operating humidity 10% to 85% noncondensing
Storage humidity 5% to 90% noncondensing
System memory 256 MB RAM 128 MB flash
Package Contents
  • WAP150 Wireless-AC/N Dual Radio Access Point
  • Power adapter 12V1.5A
  • Quick-start guide
  • Ethernet network cable
Minimum Requirements
  • Switch or router with PoE support, PoE injector, or AC power adapter
  • Web-based configuration: Java-enabled web browser
Warranty
Access point Limited lifetime

https://gioitrithuc.com/gioi-thieu-chung-cac-cau-hinh-cisco-catalyst-3560-x-series-switches/

https://gioitrithuc.com/nhung-diem-can-luu-y-khi-mua-switch-cisco-c9200l-48t-4x-a/

https://gioitrithuc.com/tham-khao-muc-gia-cisco-c9200l-48t-4g-e-hien-nay/

Bài viết liên quan

Your email will not be published. Name and Email fields are required